/

Product-news

Compact 3D Magnetic Field Mapper MMS-2A-ROT

  • 3D magnetic field mapping of disk, segment, ring magnets and rotors
  • 3-axis Hall probe for in-contact measurements
  • Intuitive Mapper software for measurement data acquisition, visualization and analysis

NanoVolt Amplifier NVM-01

NanoVolt Amplifier NVM-01 - low noise amplifier module for sensitive DC/AC measurements and data acquisition systems. It is ideal as the input unit for measuring low noise and low impedances sources.

Helmholtz Coil HHROT-1

The SENIS Model HHROT-1 Helmholtz Coils is a single axis coil pair arranged in Helmholtz geometry to give a relatively large volume of high uniformity magnetic field, with the possibility to rotate a magnetic sensor within the Helmholtz coils in all three angles (tilt, roll, pitch)

Portable Magnetic Field Mapping System M3D-2A-PORT

  • 3-axis Hall probe for 3D magnetic field measurement
  • Light (5Kg) and small 3030 x 20 x 20 cm
  • Magnetic field measurement accuracy: 1%
  • Probe positioning accuracy: 100μm
  • User-friendly mapper software

3-axis Sliding Hall Probe SHP for In-contact measurements

Very small distance (0.5 mm) between the magnet surface and the magnetic field sensitive spot of the Hall probe. Always at the same distance to the magnet surface allowing in-contact measurement. Incapsulated SENIS KS Hall probe. Ceramic package dimensions are 25x3x3mm. A ceramic friction pad allows in-contact magnetic field measurements.

New Bus Bar Current Sensor

Bus Bar current sensor modules enable measurement of currents in the large f-bandwidth of DC to 200kHz without an impact of external magnetic fields.

Special Mapper Solutions - Nanomapper

  • Compact 2-axis Hall probe (By, Bz) with field sensitive volume 10um x10um x10um
  • In-contact measurement - distance to magnet: 120um
  • Miniature horizontal and vertical Hall sensors less than 2um
  • Measurement range: +/-500mT
  • Magnetic resolution better than 5uT
  • Probe positioning resolution: +/-100nm