About Us

Magnetic Measurement

Current Measurement

Contact Us

Expo

Zug. Switzerland

Overview

Selection Chart

Pricing

Data sheets

Selection Chart

Hall Probe

	Magnetic Flux Density Vector(s)	Probe Description and Geometry
C-HYA	Y-Axis	"Closed": the sensor chip is protected from mechanical damage. Dimensions of the probe in mm: X = 4, Y = 2, Z = 16.5. Note: Suitable for transducers with an accuracy 0.1% and better. The C- probe type is robust and suitable for all magnetic measurements compatible with the probe dimensions.
C-H3A	All 3 Axis (X, Y, Z)
T-H3A	All 3 Axis (X, Y, Z)	"Thin-Tip": the probe has a thin sensitive part. The dimensions of the thin tip in mm: X = 0.64, Y = 0.55, Z = 3. Overall dimensions of the probe in mm: X = 4, Y = 2, Z = 16. Note: The transducers accuracy with a T- type probe is limited to about 1%. The T- probe type is suitable for the measurement of a magnetic field in narrow gaps and near the surface of magnets. In this probe type, the sensor chip is NOT protected from mechanical damage. CAUTION: The sensor chip is made of silicon and is fragile.

| | | | |

Senis GmbH © 2006. All rights Reserved